| Homepage | Products |  Support | Company Profile | Contact Us |　Chinese  |

     Cleaning with special  cleaning liquid 

    1. Press the ink button, then the print heads will move to the replacement position. Pull out the power cable.

    2.  Life up the ink cartridge clamps. Remove the original ink jet cartridges.

    3.  Draw some cleaning liquid from the bottle by syringe.

    4. Use the tube on the top of syringe to cover one ink inlet.

    5. Syringe 1-2ml cleaning liquid into the ink inlet.

    6. Do it again to the other ink inlets.

    7. Install the cartridges back and cover the clamp under power off. Dip the ink inlets in this cleaning liquid about 8hrs. Please note do not turn the power on during these hours.

    8. After this, turn on the printer to take the head cleaning and nozzle test.

    9. Do this cleaning operation for at least 1~2 months. It would protect your print head and extend the useful life of the printer.

PRODUCTS

Copyright © 2003-2008 eaglehc Inc. All Rights Reserved.

Shenzhen Eaglehc Enterprises co., Ltd.

Address: Mao Sheng RD,Henggang Sub-district,Longgang District,Shenzhen City,Guangdong Prov,China.   

Tel:86-755-26576008  Mobile No.86-755-13798481058  FAX:86-755-89732219  QQ:101789876 

Skype:dyshaoshuiming MSN:szeaglehc@hotmail.com   E-mail:szeaglehc@yahoo.com.cn